dmesg - kernel compile
Linux version 4.18.1-1.mga6 (arichter@duck) (gcc version 5.5.0 (Mageia 5.5.0-1.mga6)) #1 SMP Thu Aug 16 15:07:37 MDT 2018
x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'compacted' format.
BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009ffff] usable
BIOS-e820: [mem 0x00000000000a0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x0000000003ffffff] usable
BIOS-e820: [mem 0x0000000004000000-0x0000000004009fff] ACPI NVS
BIOS-e820: [mem 0x000000000400a000-0x0000000009cfffff] usable
BIOS-e820: [mem 0x0000000009d00000-0x0000000009ffffff] reserved
BIOS-e820: [mem 0x000000000a000000-0x000000000affffff] usable
BIOS-e820: [mem 0x000000000b000000-0x000000000b01ffff] reserved
BIOS-e820: [mem 0x000000000b020000-0x000000005ba1bfff] usable
BIOS-e820: [mem 0x000000005ba1c000-0x000000005bb42fff] reserved
BIOS-e820: [mem 0x000000005bb43000-0x000000005bc7cfff] usable
BIOS-e820: [mem 0x000000005bc7d000-0x000000005c04efff] ACPI NVS
BIOS-e820: [mem 0x000000005c04f000-0x000000005cf78fff] reserved
BIOS-e820: [mem 0x000000005cf79000-0x000000005effffff] usable
BIOS-e820: [mem 0x000000005f000000-0x00000000dfffffff] reserved
BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
BIOS-e820: [mem 0x00000000fd800000-0x00000000fdffffff] reserved
BIOS-e820: [mem 0x00000000fea00000-0x00000000fea0ffff] reserved
BIOS-e820: [mem 0x00000000feb80000-0x00000000fec01fff] reserved
BIOS-e820: [mem 0x00000000fec10000-0x00000000fec10fff] reserved
BIOS-e820: [mem 0x00000000fec30000-0x00000000fec30fff] reserved
BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
BIOS-e820: [mem 0x00000000fed40000-0x00000000fed44fff] reserved
BIOS-e820: [mem 0x00000000fed80000-0x00000000fed8ffff] reserved
BIOS-e820: [mem 0x00000000fedc2000-0x00000000fedcffff] reserved
BIOS-e820: [mem 0x00000000fedd4000-0x00000000fedd5fff] reserved
BIOS-e820: [mem 0x00000000fee00000-0x00000000feefffff] reserved
BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000041f33ffff] usable
NX (Execute Disable) protection: active
e820: update [mem 0x3c76d018-0x3c77e857] usable ==> usable
e820: update [mem 0x3c76d018-0x3c77e857] usable ==> usable
e820: update [mem 0x3c75f018-0x3c76c457] usable ==> usable
e820: update [mem 0x3c75f018-0x3c76c457] usable ==> usable
extended physical RAM map:
reserve setup_data: [mem 0x0000000000000000-0x000000000009ffff] usable
reserve setup_data: [mem 0x00000000000a0000-0x00000000000fffff] reserved
reserve setup_data: [mem 0x0000000000100000-0x0000000003ffffff] usable
reserve setup_data: [mem 0x0000000004000000-0x0000000004009fff] ACPI NVS
reserve setup_data: [mem 0x000000000400a000-0x0000000009cfffff] usable
reserve setup_data: [mem 0x0000000009d00000-0x0000000009ffffff] reserved
reserve setup_data: [mem 0x000000000a000000-0x000000000affffff] usable
reserve setup_data: [mem 0x000000000b000000-0x000000000b01ffff] reserved
reserve setup_data: [mem 0x000000000b020000-0x000000003c75f017] usable
reserve setup_data: [mem 0x000000003c75f018-0x000000003c76c457] usable
reserve setup_data: [mem 0x000000003c76c458-0x000000003c76d017] usable
reserve setup_data: [mem 0x000000003c76d018-0x000000003c77e857] usable
reserve setup_data: [mem 0x000000003c77e858-0x000000005ba1bfff] usable
reserve setup_data: [mem 0x000000005ba1c000-0x000000005bb42fff] reserved
reserve setup_data: [mem 0x000000005bb43000-0x000000005bc7cfff] usable
reserve setup_data: [mem 0x000000005bc7d000-0x000000005c04efff] ACPI NVS
reserve setup_data: [mem 0x000000005c04f000-0x000000005cf78fff] reserved
reserve setup_data: [mem 0x000000005cf79000-0x000000005effffff] usable
reserve setup_data: [mem 0x000000005f000000-0x00000000dfffffff] reserved
reserve setup_data: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
reserve setup_data: [mem 0x00000000fd800000-0x00000000fdffffff] reserved
reserve setup_data: [mem 0x00000000fea00000-0x00000000fea0ffff] reserved
reserve setup_data: [mem 0x00000000feb80000-0x00000000fec01fff] reserved
reserve setup_data: [mem 0x00000000fec10000-0x00000000fec10fff] reserved
reserve setup_data: [mem 0x00000000fec30000-0x00000000fec30fff] reserved
reserve setup_data: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
reserve setup_data: [mem 0x00000000fed40000-0x00000000fed44fff] reserved
reserve setup_data: [mem 0x00000000fed80000-0x00000000fed8ffff] reserved
reserve setup_data: [mem 0x00000000fedc2000-0x00000000fedcffff] reserved
reserve setup_data: [mem 0x00000000fedd4000-0x00000000fedd5fff] reserved
reserve setup_data: [mem 0x00000000fee00000-0x00000000feefffff] reserved
reserve setup_data: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
reserve setup_data: [mem 0x0000000100000000-0x000000041f33ffff] usable
efi: EFI v2.60 by American Megatrends
efi: ACPI 2.0=0x5bc7d000 ACPI=0x5bc7d000 SMBIOS=0x5cdb4000 SMBIOS 3.0=0x5cdb3000 ESRT=0x5a459898 MEMATTR=0x57acd018
SMBIOS 3.1.1 present.
DMI: Gigabyte Technology Co., Ltd. AB350M-DS3H/AB350M-DS3H-CF, BIOS F23d 04/17/2018
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
last_pfn = 0x41f340 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF write-through
C0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 000000000000 mask FFFF80000000 write-back
1 base 000080000000 mask FFFFC0000000 write-back
2 base 0000C0000000 mask FFFFE0000000 write-back
3 disabled
4 disabled
5 disabled
6 disabled
7 disabled
TOM2: 0000000420000000 aka 16896M
x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
e820: update [mem 0xe0000000-0xffffffff] usable ==> reserved
last_pfn = 0x5f000 max_arch_pfn = 0x400000000
esrt: Reserving ESRT space from 0x000000005a459898 to 0x000000005a4598d0.
Base memory trampoline at [(____ptrval____)] 96000 size 24576
Using GB pages for direct mapping
BRK [0x18a8dc000, 0x18a8dcfff] PGTABLE
BRK [0x18a8dd000, 0x18a8ddfff] PGTABLE
BRK [0x18a8de000, 0x18a8defff] PGTABLE
BRK [0x18a8df000, 0x18a8dffff] PGTABLE
BRK [0x18a8e0000, 0x18a8e0fff] PGTABLE
BRK [0x18a8e1000, 0x18a8e1fff] PGTABLE
BRK [0x18a8e2000, 0x18a8e2fff] PGTABLE
BRK [0x18a8e3000, 0x18a8e3fff] PGTABLE
BRK [0x18a8e4000, 0x18a8e4fff] PGTABLE
BRK [0x18a8e5000, 0x18a8e5fff] PGTABLE
BRK [0x18a8e6000, 0x18a8e6fff] PGTABLE
BRK [0x18a8e7000, 0x18a8e7fff] PGTABLE
Secure boot could not be determined
RAMDISK: [mem 0x3c77f000-0x3d73efff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x000000005BC7D000 000024 (v02 ALASKA)
ACPI: XSDT 0x000000005BC7D0A0 0000BC (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: FACP 0x000000005BC836D8 000114 (v06 ALASKA A M I 01072009 AMI 00010013)
ACPI BIOS Warning (bug): Optional FADT field Pm2ControlBlock has valid Length but zero Address: 0x0000000000000000/0x1 (20180531/tbfadt-624)
ACPI: DSDT 0x000000005BC7D1F0 0064E5 (v02 ALASKA A M I 01072009 INTL 20120913)
ACPI: FACS 0x000000005C038E00 000040
ACPI: APIC 0x000000005BC837F0 0000DE (v03 ALASKA A M I 01072009 AMI 00010013)
ACPI: FPDT 0x000000005BC838D0 000044 (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: FIDT 0x000000005BC83918 00009C (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: SSDT 0x000000005BC839B8 005367 (v02 ALASKA A M I 00000002 MSFT 02000002)
ACPI: SSDT 0x000000005BC88D20 00119C (v01 ALASKA A M I 00000001 AMD 00000001)
ACPI: CRAT 0x000000005BC89EC0 000810 (v01 ALASKA A M I 00000001 AMD 00000001)
ACPI: CDIT 0x000000005BC8A6D0 000029 (v01 ALASKA A M I 00000001 AMD 00000001)
ACPI: SSDT 0x000000005BC8A700 002DBA (v01 ALASKA A M I 00000001 INTL 20120913)
ACPI: MCFG 0x000000005BC8D4C0 00003C (v01 ALASKA A M I 01072009 MSFT 00010013)
ACPI: HPET 0x000000005BC8D500 000038 (v01 ALASKA A M I 01072009 AMI 00000005)
ACPI: UEFI 0x000000005BC8D538 000042 (v01 ALASKA A M I 00000000 00000000)
ACPI: BGRT 0x000000005BC8D580 000038 (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: IVRS 0x000000005BC8D5B8 0000D0 (v02 ALASKA A M I 00000001 AMD 00000000)
ACPI: SSDT 0x000000005BC8D688 0000F8 (v01 ALASKA A M I 00001000 INTL 20120913)
ACPI: SSDT 0x000000005BC8D780 000E96 (v01 ALASKA A M I 00000001 INTL 20120913)
ACPI: SSDT 0x000000005BC8E618 000850 (v01 ALASKA A M I 00000001 INTL 20120913)
ACPI: SSDT 0x000000005BC8EE68 001A41 (v01 ALASKA A M I 00000001 INTL 20120913)
ACPI: WSMT 0x000000005BC908B0 000028 (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000041f33ffff]
NODE_DATA(0) allocated [mem 0x41f33c000-0x41f33ffff]
tsc: Fast TSC calibration failed
tsc: Using PIT calibration value
Zone ranges:
DMA [mem 0x0000000000001000-0x0000000000ffffff]
DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
Normal [mem 0x0000000100000000-0x000000041f33ffff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x0000000000001000-0x000000000009ffff]
node 0: [mem 0x0000000000100000-0x0000000003ffffff]
node 0: [mem 0x000000000400a000-0x0000000009cfffff]
node 0: [mem 0x000000000a000000-0x000000000affffff]
node 0: [mem 0x000000000b020000-0x000000005ba1bfff]
node 0: [mem 0x000000005bb43000-0x000000005bc7cfff]
node 0: [mem 0x000000005cf79000-0x000000005effffff]
node 0: [mem 0x0000000100000000-0x000000041f33ffff]
Reserved but unavailable: 10158 pages
Initmem setup node 0 [mem 0x0000000000001000-0x000000041f33ffff]
On node 0 totalpages: 3656594
DMA zone: 64 pages used for memmap
DMA zone: 27 pages reserved
DMA zone: 3999 pages, LIFO batch:0
DMA32 zone: 5923 pages used for memmap
DMA32 zone: 379059 pages, LIFO batch:31
Normal zone: 51149 pages used for memmap
Normal zone: 3273536 pages, LIFO batch:31
tboot: non-0 tboot_addr but it is not of type E820_TYPE_RESERVED
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
IOAPIC[0]: apic_id 9, version 33, address 0xfec00000, GSI 0-23
IOAPIC[1]: apic_id 10, version 33, address 0xfec01000, GSI 24-55
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
ACPI: IRQ0 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x10228201 base: 0xfed00000
smpboot: Allowing 16 CPUs, 8 hotplug CPUs
PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
PM: Registered nosave memory: [mem 0x04000000-0x04009fff]
PM: Registered nosave memory: [mem 0x09d00000-0x09ffffff]
PM: Registered nosave memory: [mem 0x0b000000-0x0b01ffff]
PM: Registered nosave memory: [mem 0x3c75f000-0x3c75ffff]
PM: Registered nosave memory: [mem 0x3c76c000-0x3c76cfff]
PM: Registered nosave memory: [mem 0x3c76d000-0x3c76dfff]
PM: Registered nosave memory: [mem 0x3c77e000-0x3c77efff]
PM: Registered nosave memory: [mem 0x5ba1c000-0x5bb42fff]
PM: Registered nosave memory: [mem 0x5bc7d000-0x5c04efff]
PM: Registered nosave memory: [mem 0x5c04f000-0x5cf78fff]
PM: Registered nosave memory: [mem 0x5f000000-0xdfffffff]
PM: Registered nosave memory: [mem 0xe0000000-0xf7ffffff]
PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
PM: Registered nosave memory: [mem 0xfc000000-0xfd7fffff]
PM: Registered nosave memory: [mem 0xfd800000-0xfdffffff]
PM: Registered nosave memory: [mem 0xfe000000-0xfe9fffff]
PM: Registered nosave memory: [mem 0xfea00000-0xfea0ffff]
PM: Registered nosave memory: [mem 0xfea10000-0xfeb7ffff]
PM: Registered nosave memory: [mem 0xfeb80000-0xfec01fff]
PM: Registered nosave memory: [mem 0xfec02000-0xfec0ffff]
PM: Registered nosave memory: [mem 0xfec10000-0xfec10fff]
PM: Registered nosave memory: [mem 0xfec11000-0xfec2ffff]
PM: Registered nosave memory: [mem 0xfec30000-0xfec30fff]
PM: Registered nosave memory: [mem 0xfec31000-0xfecfffff]
PM: Registered nosave memory: [mem 0xfed00000-0xfed00fff]
PM: Registered nosave memory: [mem 0xfed01000-0xfed3ffff]
PM: Registered nosave memory: [mem 0xfed40000-0xfed44fff]
PM: Registered nosave memory: [mem 0xfed45000-0xfed7ffff]
PM: Registered nosave memory: [mem 0xfed80000-0xfed8ffff]
PM: Registered nosave memory: [mem 0xfed90000-0xfedc1fff]
PM: Registered nosave memory: [mem 0xfedc2000-0xfedcffff]
PM: Registered nosave memory: [mem 0xfedd0000-0xfedd3fff]
PM: Registered nosave memory: [mem 0xfedd4000-0xfedd5fff]
PM: Registered nosave memory: [mem 0xfedd6000-0xfedfffff]
PM: Registered nosave memory: [mem 0xfee00000-0xfeefffff]
PM: Registered nosave memory: [mem 0xfef00000-0xfeffffff]
PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
[mem 0xe0000000-0xf7ffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
random: get_random_bytes called from start_kernel+0x94/0x53a with crng_init=0
setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:16 nr_node_ids:1
percpu: Embedded 45 pages/cpu @(____ptrval____) s145816 r8192 d30312 u262144
pcpu-alloc: s145816 r8192 d30312 u262144 alloc=1*2097152
pcpu-alloc: [0] 00 01 02 03 04 05 06 07 [0] 08 09 10 11 12 13 14 15
Built 1 zonelists, mobility grouping on. Total pages: 3599431
Policy zone: Normal
audit: disabled (until reboot)
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 14231816K/14626376K available (12300K kernel code, 1341K rwdata, 3624K rodata, 1568K init, 660K bss, 394560K reserved, 0K cma-reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=16, Nodes=1
ftrace: allocating 34409 entries in 135 pages
Hierarchical RCU implementation.
RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=16.
Tasks RCU enabled.
RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=16
NR_IRQS: 4352, nr_irqs: 1096, preallocated irqs: 16
Console: colour dummy device 80x25
console [tty0] enabled
ACPI: Core revision 20180531
clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484873504 ns
hpet clockevent registered
APIC: Switch to symmetric I/O mode setup
Switched APIC routing to physical flat.
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
tsc: Fast TSC calibration failed
tsc: PIT calibration matches HPET. 1 loops
tsc: Detected 3593.217 MHz processor
clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x33cb4c159d6, max_idle_ns: 440795364582 ns
Calibrating delay loop (skipped), value calculated using timer frequency.. 7186.43 BogoMIPS (lpj=3593217)
pid_max: default: 32768 minimum: 301
Security Framework initialized
TOMOYO Linux initialized
Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Mount-cache hash table entries: 32768 (order: 6, 262144 bytes)
Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes)
mce: CPU supports 23 MCE banks
LVT offset 1 assigned for vector 0xf9
LVT offset 2 assigned for vector 0xf4
Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 512
Last level dTLB entries: 4KB 1536, 2MB 1536, 4MB 768, 1GB 0
Spectre V2 : Mitigation: Full AMD retpoline
Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
Spectre V2 : Spectre v2 mitigation: Enabling Indirect Branch Prediction Barrier
Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp
Freeing SMP alternatives memory: 32K
smpboot: CPU0: AMD Ryzen 5 2400G with Radeon Vega Graphics (family: 0x17, model: 0x11, stepping: 0x0)
Performance Events: Fam17h core perfctr, AMD PMU driver.
... version: 0
... bit width: 48
... generic registers: 6
... value mask: 0000ffffffffffff
... max period: 00007fffffffffff
... fixed-purpose events: 0
... event mask: 000000000000003f
Hierarchical SRCU implementation.
MCE: In-kernel MCE decoding enabled.
smp: Bringing up secondary CPUs ...
x86: Booting SMP configuration:
.... node #0, CPUs: #1 #2 #3 #4 #5 #6 #7
smp: Brought up 1 node, 8 CPUs
smpboot: Max logical packages: 2
smpboot: Total of 8 processors activated (57491.47 BogoMIPS)
devtmpfs: initialized
x86/mm: Memory block size: 128MB
PM: Registering ACPI NVS region [mem 0x04000000-0x04009fff] (40960 bytes)
PM: Registering ACPI NVS region [mem 0x5bc7d000-0x5c04efff] (4005888 bytes)
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
futex hash table entries: 4096 (order: 6, 262144 bytes)
xor: automatically using best checksumming function avx
pinctrl core: initialized pinctrl subsystem
RTC time: 7:46:20, date: 08/17/18
NET: Registered protocol family 16
cpuidle: using governor ladder
cpuidle: using governor menu
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
PCI: Using configuration type 1 for base access
HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
raid6: sse2x1 gen() 8613 MB/s
raid6: sse2x1 xor() 8556 MB/s
raid6: sse2x2 gen() 18082 MB/s
raid6: sse2x2 xor() 11724 MB/s
raid6: sse2x4 gen() 17570 MB/s
raid6: sse2x4 xor() 11136 MB/s
raid6: avx2x1 gen() 19468 MB/s
raid6: avx2x1 xor() 15582 MB/s
raid6: avx2x2 gen() 26156 MB/s
raid6: avx2x2 xor() 16800 MB/s
raid6: avx2x4 gen() 26207 MB/s
raid6: avx2x4 xor() 14982 MB/s
raid6: using algorithm avx2x4 gen() 26207 MB/s
raid6: .... xor() 14982 MB/s, rmw enabled
raid6: using avx2x2 recovery algorithm
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Added _OSI(Linux-Dell-Video)
ACPI BIOS Error (bug): Failure creating [\_SB.SMIC], AE_ALREADY_EXISTS (20180531/dswload2-316)
ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20180531/psobject-221)
ACPI BIOS Error (bug): Failure creating [\_SB.SMIB], AE_ALREADY_EXISTS (20180531/dsfield-594)
ACPI: 8 ACPI AML tables successfully acquired and loaded
ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: Enabled 2 GPEs in block 00 to 1F
ACPI: Power Resource [P0ST] (on)
ACPI: Power Resource [P3ST] (on)
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A08:00: _OSC: platform does not support [LTR]
acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io 0x0000-0x03af window]
pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7 window]
pci_bus 0000:00: root bus resource [io 0x03b0-0x03df window]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window]
pci_bus 0000:00: root bus resource [mem 0xe0000000-0xfec2ffff window]
pci_bus 0000:00: root bus resource [mem 0xfee00000-0xffffffff window]
pci_bus 0000:00: root bus resource [bus 00-ff]
pci 0000:00:00.0: [1022:15d0] type 00 class 0x060000
pci 0000:00:00.2: [1022:15d1] type 00 class 0x080600
pci 0000:00:01.0: [1022:1452] type 00 class 0x060000
pci 0000:00:01.2: [1022:15d3] type 01 class 0x060400
pci 0000:00:01.2: PME# supported from D0 D3hot D3cold
pci 0000:00:08.0: [1022:1452] type 00 class 0x060000
pci 0000:00:08.1: [1022:15db] type 01 class 0x060400
pci 0000:00:08.1: enabling Extended Tags
pci 0000:00:08.1: PME# supported from D0 D3hot D3cold
pci 0000:00:08.2: [1022:15dc] type 01 class 0x060400
pci 0000:00:08.2: enabling Extended Tags
pci 0000:00:08.2: PME# supported from D0 D3hot D3cold
pci 0000:00:14.0: [1022:790b] type 00 class 0x0c0500
pci 0000:00:14.3: [1022:790e] type 00 class 0x060100
pci 0000:00:18.0: [1022:15e8] type 00 class 0x060000
pci 0000:00:18.1: [1022:15e9] type 00 class 0x060000
pci 0000:00:18.2: [1022:15ea] type 00 class 0x060000
pci 0000:00:18.3: [1022:15eb] type 00 class 0x060000
pci 0000:00:18.4: [1022:15ec] type 00 class 0x060000
pci 0000:00:18.5: [1022:15ed] type 00 class 0x060000
pci 0000:00:18.6: [1022:15ee] type 00 class 0x060000
pci 0000:00:18.7: [1022:15ef] type 00 class 0x060000
pci 0000:01:00.0: [1022:43b9] type 00 class 0x0c0330
pci 0000:01:00.0: reg 0x10: [mem 0xfe8a0000-0xfe8a7fff 64bit]
pci 0000:01:00.0: PME# supported from D3hot D3cold
pci 0000:01:00.1: [1022:43b5] type 00 class 0x010601
pci 0000:01:00.1: reg 0x24: [mem 0xfe880000-0xfe89ffff]
pci 0000:01:00.1: reg 0x30: [mem 0xfe800000-0xfe87ffff pref]
pci 0000:01:00.1: PME# supported from D3hot D3cold
pci 0000:01:00.2: [1022:43b0] type 01 class 0x060400
pci 0000:01:00.2: PME# supported from D3hot D3cold
pci 0000:00:01.2: PCI bridge to [bus 01-07]
pci 0000:00:01.2: bridge window [io 0xf000-0xffff]
pci 0000:00:01.2: bridge window [mem 0xfe700000-0xfe8fffff]
pci 0000:00:01.2: bridge window [mem 0xf0300000-0xf03fffff 64bit pref]
pci 0000:02:00.0: [1022:43b4] type 01 class 0x060400
pci 0000:02:00.0: PME# supported from D3hot D3cold
pci 0000:02:01.0: [1022:43b4] type 01 class 0x060400
pci 0000:02:01.0: PME# supported from D3hot D3cold
pci 0000:02:02.0: [1022:43b4] type 01 class 0x060400
pci 0000:02:02.0: PME# supported from D3hot D3cold
pci 0000:02:03.0: [1022:43b4] type 01 class 0x060400
pci 0000:02:03.0: PME# supported from D3hot D3cold
pci 0000:02:04.0: [1022:43b4] type 01 class 0x060400
pci 0000:02:04.0: PME# supported from D3hot D3cold
pci 0000:01:00.2: PCI bridge to [bus 02-07]
pci 0000:01:00.2: bridge window [io 0xf000-0xffff]
pci 0000:01:00.2: bridge window [mem 0xfe700000-0xfe7fffff]
pci 0000:01:00.2: bridge window [mem 0xf0300000-0xf03fffff 64bit pref]
pci 0000:02:00.0: PCI bridge to [bus 03]
pci 0000:04:00.0: [10ec:8168] type 00 class 0x020000
pci 0000:04:00.0: reg 0x10: [io 0xf000-0xf0ff]
pci 0000:04:00.0: reg 0x18: [mem 0xfe700000-0xfe700fff 64bit]
pci 0000:04:00.0: reg 0x20: [mem 0xf0300000-0xf0303fff 64bit pref]
pci 0000:04:00.0: supports D1 D2
pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:02:01.0: PCI bridge to [bus 04]
pci 0000:02:01.0: bridge window [io 0xf000-0xffff]
pci 0000:02:01.0: bridge window [mem 0xfe700000-0xfe7fffff]
pci 0000:02:01.0: bridge window [mem 0xf0300000-0xf03fffff 64bit pref]
pci 0000:02:02.0: PCI bridge to [bus 05]
pci 0000:02:03.0: PCI bridge to [bus 06]
pci 0000:02:04.0: PCI bridge to [bus 07]
pci 0000:08:00.0: [1002:15dd] type 00 class 0x030000
pci 0000:08:00.0: reg 0x10: [mem 0xe0000000-0xefffffff 64bit pref]
pci 0000:08:00.0: reg 0x18: [mem 0xf0000000-0xf01fffff 64bit pref]
pci 0000:08:00.0: reg 0x20: [io 0xe000-0xe0ff]
pci 0000:08:00.0: reg 0x24: [mem 0xfe600000-0xfe67ffff]
pci 0000:08:00.0: enabling Extended Tags
pci 0000:08:00.0: BAR 0: assigned to efifb
pci 0000:08:00.0: PME# supported from D1 D2 D3hot D3cold
pci 0000:08:00.1: [1002:15de] type 00 class 0x040300
pci 0000:08:00.1: reg 0x10: [mem 0xfe688000-0xfe68bfff]
pci 0000:08:00.1: enabling Extended Tags
pci 0000:08:00.1: PME# supported from D1 D2 D3hot D3cold
pci 0000:08:00.2: [1022:15df] type 00 class 0x108000
pci 0000:08:00.2: reg 0x18: [mem 0xfe500000-0xfe5fffff]
pci 0000:08:00.2: reg 0x24: [mem 0xfe68c000-0xfe68dfff]
pci 0000:08:00.2: enabling Extended Tags
pci 0000:08:00.3: [1022:15e0] type 00 class 0x0c0330
pci 0000:08:00.3: reg 0x10: [mem 0xfe400000-0xfe4fffff 64bit]
pci 0000:08:00.3: enabling Extended Tags
pci 0000:08:00.3: PME# supported from D0 D3hot D3cold
pci 0000:08:00.4: [1022:15e1] type 00 class 0x0c0330
pci 0000:08:00.4: reg 0x10: [mem 0xfe300000-0xfe3fffff 64bit]
pci 0000:08:00.4: enabling Extended Tags
pci 0000:08:00.4: PME# supported from D0 D3hot D3cold
pci 0000:08:00.6: [1022:15e3] type 00 class 0x040300
pci 0000:08:00.6: reg 0x10: [mem 0xfe680000-0xfe687fff]
pci 0000:08:00.6: enabling Extended Tags
pci 0000:08:00.6: PME# supported from D0 D3hot D3cold
pci 0000:00:08.1: PCI bridge to [bus 08]
pci 0000:00:08.1: bridge window [io 0xe000-0xefff]
pci 0000:00:08.1: bridge window [mem 0xfe300000-0xfe6fffff]
pci 0000:00:08.1: bridge window [mem 0xe0000000-0xf01fffff 64bit pref]
pci 0000:09:00.0: [1022:7901] type 00 class 0x010601
pci 0000:09:00.0: reg 0x24: [mem 0xfe900000-0xfe9007ff]
pci 0000:09:00.0: enabling Extended Tags
pci 0000:09:00.0: PME# supported from D3hot D3cold
pci 0000:00:08.2: PCI bridge to [bus 09]
pci 0000:00:08.2: bridge window [mem 0xfe900000-0xfe9fffff]
ACPI: PCI Interrupt Link [LNKA] (IRQs 4 5 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKB] (IRQs 4 5 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKC] (IRQs 4 5 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKD] (IRQs 4 5 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKE] (IRQs 4 5 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKF] (IRQs 4 5 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKG] (IRQs 4 5 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKH] (IRQs 4 5 7 10 11 14 15) *0
pci 0000:08:00.0: vgaarb: setting as boot VGA device
pci 0000:08:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
pci 0000:08:00.0: vgaarb: bridge control possible
vgaarb: loaded
SCSI subsystem initialized
libata version 3.00 loaded.
EDAC MC: Ver: 3.0.0
Registered efivars operations
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x09d00000-0x0bffffff]
e820: reserve RAM buffer [mem 0x0b000000-0x0bffffff]
e820: reserve RAM buffer [mem 0x3c75f018-0x3fffffff]
e820: reserve RAM buffer [mem 0x3c76d018-0x3fffffff]
e820: reserve RAM buffer [mem 0x5ba1c000-0x5bffffff]
e820: reserve RAM buffer [mem 0x5bc7d000-0x5bffffff]
e820: reserve RAM buffer [mem 0x5f000000-0x5fffffff]
e820: reserve RAM buffer [mem 0x41f340000-0x41fffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 comparators, 32-bit 14.318180 MHz counter
clocksource: Switched to clocksource tsc-early
VFS: Disk quotas dquot_6.6.0
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
pnp: PnP ACPI init
system 00:00: [mem 0xf8000000-0xfbffffff] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
system 00:01: [mem 0xfeb80000-0xfebfffff] could not be reserved
system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
system 00:03: [io 0x0a00-0x0a2f] has been reserved
system 00:03: [io 0x0a30-0x0a3f] has been reserved
system 00:03: [io 0x0a40-0x0a4f] has been reserved
system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:04: [io 0x04d0-0x04d1] has been reserved
system 00:04: [io 0x040b] has been reserved
system 00:04: [io 0x04d6] has been reserved
system 00:04: [io 0x0c00-0x0c01] has been reserved
system 00:04: [io 0x0c14] has been reserved
system 00:04: [io 0x0c50-0x0c51] has been reserved
system 00:04: [io 0x0c52] has been reserved
system 00:04: [io 0x0c6c] has been reserved
system 00:04: [io 0x0c6f] has been reserved
system 00:04: [io 0x0cd0-0x0cd1] has been reserved
system 00:04: [io 0x0cd2-0x0cd3] has been reserved
system 00:04: [io 0x0cd4-0x0cd5] has been reserved
system 00:04: [io 0x0cd6-0x0cd7] has been reserved
system 00:04: [io 0x0cd8-0x0cdf] has been reserved
system 00:04: [io 0x0800-0x089f] has been reserved
system 00:04: [io 0x0b00-0x0b0f] has been reserved
system 00:04: [io 0x0b20-0x0b3f] has been reserved
system 00:04: [io 0x0900-0x090f] has been reserved
system 00:04: [io 0x0910-0x091f] has been reserved
system 00:04: [mem 0xfec00000-0xfec00fff] could not be reserved
system 00:04: [mem 0xfec01000-0xfec01fff] could not be reserved
system 00:04: [mem 0xfedc0000-0xfedc0fff] has been reserved
system 00:04: [mem 0xfee00000-0xfee00fff] has been reserved
system 00:04: [mem 0xfed80000-0xfed8ffff] could not be reserved
system 00:04: [mem 0xfec10000-0xfec10fff] has been reserved
system 00:04: [mem 0xff000000-0xffffffff] has been reserved
system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp: PnP ACPI: found 5 devices
clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
pci 0000:02:00.0: PCI bridge to [bus 03]
pci 0000:02:01.0: PCI bridge to [bus 04]
pci 0000:02:01.0: bridge window [io 0xf000-0xffff]
pci 0000:02:01.0: bridge window [mem 0xfe700000-0xfe7fffff]
pci 0000:02:01.0: bridge window [mem 0xf0300000-0xf03fffff 64bit pref]
pci 0000:02:02.0: PCI bridge to [bus 05]
pci 0000:02:03.0: PCI bridge to [bus 06]
pci 0000:02:04.0: PCI bridge to [bus 07]
pci 0000:01:00.2: PCI bridge to [bus 02-07]
pci 0000:01:00.2: bridge window [io 0xf000-0xffff]
pci 0000:01:00.2: bridge window [mem 0xfe700000-0xfe7fffff]
pci 0000:01:00.2: bridge window [mem 0xf0300000-0xf03fffff 64bit pref]
pci 0000:00:01.2: PCI bridge to [bus 01-07]
pci 0000:00:01.2: bridge window [io 0xf000-0xffff]
pci 0000:00:01.2: bridge window [mem 0xfe700000-0xfe8fffff]
pci 0000:00:01.2: bridge window [mem 0xf0300000-0xf03fffff 64bit pref]
pci 0000:00:08.1: PCI bridge to [bus 08]
pci 0000:00:08.1: bridge window [io 0xe000-0xefff]
pci 0000:00:08.1: bridge window [mem 0xfe300000-0xfe6fffff]
pci 0000:00:08.1: bridge window [mem 0xe0000000-0xf01fffff 64bit pref]
pci 0000:00:08.2: PCI bridge to [bus 09]
pci 0000:00:08.2: bridge window [mem 0xfe900000-0xfe9fffff]
pci_bus 0000:00: resource 4 [io 0x0000-0x03af window]
pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7 window]
pci_bus 0000:00: resource 6 [io 0x03b0-0x03df window]
pci_bus 0000:00: resource 7 [io 0x0d00-0xffff window]
pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff window]
pci_bus 0000:00: resource 10 [mem 0xe0000000-0xfec2ffff window]
pci_bus 0000:00: resource 11 [mem 0xfee00000-0xffffffff window]
pci_bus 0000:01: resource 0 [io 0xf000-0xffff]
pci_bus 0000:01: resource 1 [mem 0xfe700000-0xfe8fffff]
pci_bus 0000:01: resource 2 [mem 0xf0300000-0xf03fffff 64bit pref]
pci_bus 0000:02: resource 0 [io 0xf000-0xffff]
pci_bus 0000:02: resource 1 [mem 0xfe700000-0xfe7fffff]
pci_bus 0000:02: resource 2 [mem 0xf0300000-0xf03fffff 64bit pref]
pci_bus 0000:04: resource 0 [io 0xf000-0xffff]
pci_bus 0000:04: resource 1 [mem 0xfe700000-0xfe7fffff]
pci_bus 0000:04: resource 2 [mem 0xf0300000-0xf03fffff 64bit pref]
pci_bus 0000:08: resource 0 [io 0xe000-0xefff]
pci_bus 0000:08: resource 1 [mem 0xfe300000-0xfe6fffff]
pci_bus 0000:08: resource 2 [mem 0xe0000000-0xf01fffff 64bit pref]
pci_bus 0000:09: resource 1 [mem 0xfe900000-0xfe9fffff]
NET: Registered protocol family 2
tcp_listen_portaddr_hash hash table entries: 8192 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
UDP hash table entries: 8192 (order: 6, 262144 bytes)
UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
NET: Registered protocol family 1
NET: Registered protocol family 44
pci 0000:08:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
pci 0000:08:00.1: Linked as a consumer to 0000:08:00.0
PCI: CLS 64 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 16128K
AMD-Vi: Unable to write to IOMMU perf counter.
pci 0000:00:00.2: can't derive routing for PCI INT A
pci 0000:00:00.2: PCI INT A: not connected
iommu: Adding device 0000:00:01.0 to group 0
iommu: Adding device 0000:00:01.2 to group 1
iommu: Adding device 0000:00:08.0 to group 2
iommu: Adding device 0000:00:08.1 to group 3
iommu: Adding device 0000:00:08.2 to group 2
iommu: Adding device 0000:00:14.0 to group 4
iommu: Adding device 0000:00:14.3 to group 4
iommu: Adding device 0000:00:18.0 to group 5
iommu: Adding device 0000:00:18.1 to group 5
iommu: Adding device 0000:00:18.2 to group 5
iommu: Adding device 0000:00:18.3 to group 5
iommu: Adding device 0000:00:18.4 to group 5
iommu: Adding device 0000:00:18.5 to group 5
iommu: Adding device 0000:00:18.6 to group 5
iommu: Adding device 0000:00:18.7 to group 5
iommu: Adding device 0000:01:00.0 to group 6
iommu: Adding device 0000:01:00.1 to group 6
iommu: Adding device 0000:01:00.2 to group 6
iommu: Adding device 0000:02:00.0 to group 6
iommu: Adding device 0000:02:01.0 to group 6
iommu: Adding device 0000:02:02.0 to group 6
iommu: Adding device 0000:02:03.0 to group 6
iommu: Adding device 0000:02:04.0 to group 6
iommu: Adding device 0000:04:00.0 to group 6
iommu: Adding device 0000:08:00.0 to group 7
iommu: Using direct mapping for device 0000:08:00.0
iommu: Adding device 0000:08:00.1 to group 8
iommu: Adding device 0000:08:00.2 to group 8
iommu: Adding device 0000:08:00.3 to group 8
iommu: Adding device 0000:08:00.4 to group 8
iommu: Adding device 0000:08:00.6 to group 8
iommu: Adding device 0000:09:00.0 to group 2
AMD-Vi: Found IOMMU at 0000:00:00.2 cap 0x40
AMD-Vi: Extended features (0x4f77ef22294ada):
PPR NX GT IA GA PC GA_vAPIC
AMD-Vi: Interrupt remapping enabled
AMD-Vi: virtual APIC enabled
AMD-Vi: Lazy IO/TLB flushing enabled
amd_uncore: AMD NB counters detected
amd_uncore: AMD LLC counters detected
Initialise system trusted keyrings
workingset: timestamp_bits=56 max_order=22 bucket_order=0
zbud: loaded
pstore: using deflate compression
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
io scheduler mq-deadline registered
io scheduler kyber registered
io scheduler bfq registered
pcieport 0000:00:01.2: AER enabled with IRQ 26
pcieport 0000:00:01.2: Signaling PME with IRQ 26
pcieport 0000:00:08.1: Signaling PME with IRQ 27
pcieport 0000:00:08.2: Signaling PME with IRQ 28
efifb: probing for efifb
efifb: framebuffer at 0xe0000000, using 3072k, total 3072k
efifb: mode is 1024x768x32, linelength=4096, pages=1
efifb: scrolling: redraw
efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
Console: switching to colour frame buffer device 128x48
fb0: EFI VGA frame buffer device
Monitor-Mwait will be used to enter C-1 state
Linux agpgart interface v0.103
brd: module loaded
ahci 0000:01:00.1: version 3.0
ahci 0000:01:00.1: SSS flag set, parallel bus scan disabled
ahci 0000:01:00.1: AHCI 0001.0301 32 slots 8 ports 6 Gbps 0xff impl SATA mode
ahci 0000:01:00.1: flags: 64bit ncq sntf stag pm led clo only pmp pio slum part sxs deso sadm sds apst
scsi host0: ahci
scsi host1: ahci
scsi host2: ahci
scsi host3: ahci
scsi host4: ahci
scsi host5: ahci
scsi host6: ahci
scsi host7: ahci
ata1: SATA max UDMA/133 abar m131072@0xfe880000 port 0xfe880100 irq 39
ata2: SATA max UDMA/133 abar m131072@0xfe880000 port 0xfe880180 irq 39
ata3: SATA max UDMA/133 abar m131072@0xfe880000 port 0xfe880200 irq 39
ata4: SATA max UDMA/133 abar m131072@0xfe880000 port 0xfe880280 irq 39
ata5: SATA max UDMA/133 abar m131072@0xfe880000 port 0xfe880300 irq 39
ata6: SATA max UDMA/133 abar m131072@0xfe880000 port 0xfe880380 irq 39
ata7: SATA max UDMA/133 abar m131072@0xfe880000 port 0xfe880400 irq 39
ata8: SATA max UDMA/133 abar m131072@0xfe880000 port 0xfe880480 irq 39
ahci 0000:09:00.0: AHCI 0001.0301 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
ahci 0000:09:00.0: flags: 64bit ncq sntf ilck pm led clo only pmp fbs pio slum part sxs
ahci 0000:09:00.0: both AHCI_HFLAG_MULTI_MSI flag set and custom irq handler implemented
scsi host8: ahci
scsi host9: ahci
ata9: SATA max UDMA/133 abar m2048@0xfe900000 port 0xfe900100 irq 41
ata10: SATA max UDMA/133 abar m2048@0xfe900000 port 0xfe900180 irq 42
i8042: PNP: No PS/2 controller found.
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:02: RTC can wake from S4
rtc_cmos 00:02: registered as rtc0
rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
ledtrig-cpu: registered to indicate activity on CPUs
EFI Variables Facility v0.08 2004-May-17
Key type dns_resolver registered
mpls_gso: MPLS GSO support
microcode: CPU0: patch_level=0x0810100b
microcode: CPU1: patch_level=0x0810100b
microcode: CPU2: patch_level=0x0810100b
microcode: CPU3: patch_level=0x0810100b
microcode: CPU4: patch_level=0x0810100b
microcode: CPU5: patch_level=0x0810100b
microcode: CPU6: patch_level=0x0810100b
microcode: CPU7: patch_level=0x0810100b
microcode: Microcode Update Driver: v2.2.
sched_clock: Marking stable (547142107, 0)->(646771345, -99629238)
registered taskstats version 1
Loading compiled-in X.509 certificates
zswap: loaded using pool lzo/zbud
Btrfs loaded, crc32c=crc32c-generic
Key type encrypted registered
Magic number: 14:266:774
mem zero: hash matches
rtc_cmos 00:02: setting system clock to 2018-08-17 07:46:20 UTC (1534491980)
ata9: SATA link down (SStatus 0 SControl 300)
ata10: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata10.00: ATA-11: WDC WDS250G2B0B-00YS70, X61130WD, max UDMA/133
ata10.00: 488397168 sectors, multi 1: LBA48 NCQ (depth 32), AA
ata1.00: ATA-10: ST4000DM005-2DP166, 0001, max UDMA/133
ata1.00: 7814037168 sectors, multi 16: LBA48 NCQ (depth 32), AA
ata10.00: configured for UDMA/133
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access ATA ST4000DM005-2DP1 0001 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 7814037168 512-byte logical blocks: (4.00 TB/3.64 TiB)
sd 0:0:0:0: [sda] 4096-byte physical blocks
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1
sd 0:0:0:0: [sda] Attached SCSI disk
ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata2.00: ATA-10: ST4000DM005-2DP166, 0001, max UDMA/133
ata2.00: 7814037168 sectors, multi 16: LBA48 NCQ (depth 32), AA
ata2.00: configured for UDMA/133
scsi 1:0:0:0: Direct-Access ATA ST4000DM005-2DP1 0001 PQ: 0 ANSI: 5
sd 1:0:0:0: [sdb] 7814037168 512-byte logical blocks: (4.00 TB/3.64 TiB)
sd 1:0:0:0: [sdb] 4096-byte physical blocks
sd 1:0:0:0: [sdb] Write Protect is off
sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sdb: sdb1
sd 1:0:0:0: [sdb] Attached SCSI disk
tsc: Refined TSC clocksource calibration: 3593.232 MHz
clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x33cb59d6956, max_idle_ns: 440795347381 ns
clocksource: Switched to clocksource tsc
ata3: SATA link down (SStatus 0 SControl 300)
ata4: SATA link down (SStatus 0 SControl 300)
ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata5.00: ATA-8: WDC WD20EARS-00S8B1, 80.00A80, max UDMA/133
ata5.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 32), AA
ata5.00: configured for UDMA/133
scsi 4:0:0:0: Direct-Access ATA WDC WD20EARS-00S 0A80 PQ: 0 ANSI: 5
sd 4:0:0:0: [sdc] 3907029168 512-byte logical blocks: (2.00 TB/1.82 TiB)
sd 4:0:0:0: [sdc] Write Protect is off
sd 4:0:0:0: [sdc] Mode Sense: 00 3a 00 00
sd 4:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sdc: sdc1
sd 4:0:0:0: [sdc] Attached SCSI disk
ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata6.00: ATAPI: ASUS DRW-24B1ST j, 1.01, max UDMA/133
ata6.00: configured for UDMA/133
scsi 5:0:0:0: CD-ROM ASUS DRW-24B1ST j 1.01 PQ: 0 ANSI: 5
ata7: SATA link down (SStatus 0 SControl 300)
ata8: SATA link down (SStatus 0 SControl 300)
scsi 9:0:0:0: Direct-Access ATA WDC WDS250G2B0B- 30WD PQ: 0 ANSI: 5
sd 9:0:0:0: [sdd] 488397168 512-byte logical blocks: (250 GB/233 GiB)
sd 9:0:0:0: [sdd] Write Protect is off
sd 9:0:0:0: [sdd] Mode Sense: 00 3a 00 00
sd 9:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sdd: sdd1 sdd2 < sdd5 sdd6 sdd7 sdd8 sdd9 sdd10 >
sd 9:0:0:0: [sdd] Attached SCSI removable disk
Freeing unused kernel memory: 1568K
Write protecting the kernel read-only data: 18432k
Freeing unused kernel memory: 2016K
Freeing unused kernel memory: 472K
dracut: dracut-046
random: systemd-udevd: uninitialized urandom read (16 bytes read)
random: systemd-udevd: uninitialized urandom read (16 bytes read)
random: systemd-udevd: uninitialized urandom read (16 bytes read)
dracut: Starting plymouth daemon
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
xhci_hcd 0000:01:00.0: xHCI Host Controller
xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 1
random: fast init done
xhci_hcd 0000:01:00.0: hcc params 0x0200ef81 hci version 0x110 quirks 0x0000000008000410
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.18
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: xHCI Host Controller
usb usb1: Manufacturer: Linux 4.18.1-1.mga6 xhci-hcd
usb usb1: SerialNumber: 0000:01:00.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 14 ports detected
xhci_hcd 0000:01:00.0: xHCI Host Controller
xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 2
xhci_hcd 0000:01:00.0: Host supports USB 3.10 Enhanced SuperSpeed
usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 4.18
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: xHCI Host Controller
usb usb2: Manufacturer: Linux 4.18.1-1.mga6 xhci-hcd
usb usb2: SerialNumber: 0000:01:00.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 8 ports detected
usb: port power management may be unreliable
xhci_hcd 0000:08:00.3: xHCI Host Controller
xhci_hcd 0000:08:00.3: new USB bus registered, assigned bus number 3
xhci_hcd 0000:08:00.3: hcc params 0x0270ffe5 hci version 0x110 quirks 0x0000000040000410
usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.18
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: xHCI Host Controller
usb usb3: Manufacturer: Linux 4.18.1-1.mga6 xhci-hcd
usb usb3: SerialNumber: 0000:08:00.3
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 4 ports detected
xhci_hcd 0000:08:00.3: xHCI Host Controller
xhci_hcd 0000:08:00.3: new USB bus registered, assigned bus number 4
xhci_hcd 0000:08:00.3: Host supports USB 3.10 Enhanced SuperSpeed
usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 4.18
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: xHCI Host Controller
usb usb4: Manufacturer: Linux 4.18.1-1.mga6 xhci-hcd
usb usb4: SerialNumber: 0000:08:00.3
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 4 ports detected
xhci_hcd 0000:08:00.4: xHCI Host Controller
xhci_hcd 0000:08:00.4: new USB bus registered, assigned bus number 5
xhci_hcd 0000:08:00.4: hcc params 0x0260ffe5 hci version 0x110 quirks 0x0000000040000410
usb usb5: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.18
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: xHCI Host Controller
usb usb5: Manufacturer: Linux 4.18.1-1.mga6 xhci-hcd
usb usb5: SerialNumber: 0000:08:00.4
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 1 port detected
xhci_hcd 0000:08:00.4: xHCI Host Controller
xhci_hcd 0000:08:00.4: new USB bus registered, assigned bus number 6
xhci_hcd 0000:08:00.4: Host supports USB 3.10 Enhanced SuperSpeed
usb usb6: We don't know the algorithms for LPM for this host, disabling LPM.
usb usb6: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 4.18
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: xHCI Host Controller
usb usb6: Manufacturer: Linux 4.18.1-1.mga6 xhci-hcd
usb usb6: SerialNumber: 0000:08:00.4
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 1 port detected
sr 5:0:0:0: [sr0] scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 5:0:0:0: Attached scsi CD-ROM sr0
PM: Marking nosave pages: [mem 0x00000000-0x00000fff]
PM: Marking nosave pages: [mem 0x000a0000-0x000fffff]
PM: Marking nosave pages: [mem 0x04000000-0x04009fff]
PM: Marking nosave pages: [mem 0x09d00000-0x09ffffff]
PM: Marking nosave pages: [mem 0x0b000000-0x0b01ffff]
PM: Marking nosave pages: [mem 0x3c75f000-0x3c75ffff]
PM: Marking nosave pages: [mem 0x3c76c000-0x3c76dfff]
PM: Marking nosave pages: [mem 0x3c77e000-0x3c77efff]
PM: Marking nosave pages: [mem 0x5ba1c000-0x5bb42fff]
PM: Marking nosave pages: [mem 0x5bc7d000-0x5cf78fff]
PM: Marking nosave pages: [mem 0x5f000000-0xffffffff]
PM: Basic memory bitmaps created
PM: Basic memory bitmaps freed
PM: Image not found (code -22)
EXT4-fs (sdd8): mounted filesystem with ordered data mode. Opts: data=ordered
EXT4-fs (sdd8): mounted filesystem with ordered data mode. Opts: data=ordered
dracut: Mounted root filesystem /dev/sdd8
dracut: Switching root
random: crng init done
random: 7 urandom warning(s) missed due to ratelimiting
Not activating Mandatory Access Control as /sbin/tomoyo-init does not exist.
systemd[1]: RTC configured in localtime, applying delta of -360 minutes to system time.
NET: Registered protocol family 10
Segment Routing with IPv6
systemd[1]: systemd 230 running in system mode. (+PAM +AUDIT -SELINUX +IMA -APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 -SECCOMP +BLKID +ELFUTILS +KMOD +IDN)
systemd[1]: Detected architecture x86-64.
systemd[1]: Set hostname to .
usb 1-2: new high-speed USB device number 2 using xhci_hcd
systemd[1]: Configuration file /usr/lib/systemd/system/mythbackend.service is marked executable. Please remove executable permission bits. Proceeding anyway.
systemd[1]: Reached target Remote File Systems.
systemd[1]: Reached target OpenVPN Networks.
systemd[1]: Reached target Encrypted Volumes.
systemd[1]: Listening on udev Control Socket.
systemd[1]: Created slice System Slice.
systemd[1]: Created slice system-getty.slice.
EXT4-fs (sdd8): re-mounted. Opts: acl
systemd-journald[505]: Received request to flush runtime journal from PID 1
usb 1-2: New USB device found, idVendor=05e3, idProduct=0608, bcdDevice=77.63
usb 1-2: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 1-2: Product: USB2.0 Hub
hub 1-2:1.0: USB hub found
hub 1-2:1.0: 4 ports detected
acpi_cpufreq: overriding BIOS provided _PSD data
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
piix4_smbus 0000:00:14.0: Using register 0x02 for SMBus port selection
cryptd: max_cpu_qlen set to 1000
sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver
sp5100-tco sp5100-tco: Using 0xfeb00000 for watchdog MMIO address
sp5100-tco sp5100-tco: initialized. heartbeat=60 sec (nowayout=1)
AVX2 version of gcm_enc/dec engaged.
AES CTR mode by8 optimization enabled
r8169 0000:04:00.0 eth0: RTL8168g/8111g, e0:d5:5e:6c:a0:f4, XID 4c000800, IRQ 62
r8169 0000:04:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
r8169 0000:04:00.0 enp4s0: renamed from eth0
snd_hda_intel 0000:08:00.1: Handle vga_switcheroo audio client
input: HD-Audio Generic HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:08.1/0000:08:00.1/sound/card0/input2
input: HD-Audio Generic HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:08.1/0000:08:00.1/sound/card0/input3
input: HD-Audio Generic HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:08.1/0000:08:00.1/sound/card0/input4
input: HD-Audio Generic HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:08.1/0000:08:00.1/sound/card0/input5
input: HD-Audio Generic HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:08.1/0000:08:00.1/sound/card0/input6
input: HD-Audio Generic HDMI/DP,pcm=11 as /devices/pci0000:00/0000:00:08.1/0000:08:00.1/sound/card0/input7
Adding 4994176k swap on /dev/sdd6. Priority:-2 extents:1 across:4994176k SSFS
snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALC887-VD: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line
snd_hda_codec_realtek hdaudioC1D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC1D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC1D0: mono: mono_out=0x0
snd_hda_codec_realtek hdaudioC1D0: dig-out=0x11/0x0
snd_hda_codec_realtek hdaudioC1D0: inputs:
snd_hda_codec_realtek hdaudioC1D0: Front Mic=0x19
snd_hda_codec_realtek hdaudioC1D0: Rear Mic=0x18
snd_hda_codec_realtek hdaudioC1D0: Line=0x1a
input: HD-Audio Generic Front Mic as /devices/pci0000:00/0000:00:08.1/0000:08:00.6/sound/card1/input8
input: HD-Audio Generic Rear Mic as /devices/pci0000:00/0000:00:08.1/0000:08:00.6/sound/card1/input9
input: HD-Audio Generic Line as /devices/pci0000:00/0000:00:08.1/0000:08:00.6/sound/card1/input10
input: HD-Audio Generic Line Out as /devices/pci0000:00/0000:00:08.1/0000:08:00.6/sound/card1/input11
input: HD-Audio Generic Front Headphone as /devices/pci0000:00/0000:00:08.1/0000:08:00.6/sound/card1/input12
kvm: Nested Virtualization enabled
kvm: Nested Paging enabled
SVM: Virtual VMLOAD VMSAVE supported
SVM: Virtual GIF supported
EDAC amd64: Node 0: DRAM ECC disabled.
EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
EXT4-fs (sdd9): mounted filesystem with ordered data mode. Opts: acl
EXT4-fs (sdd7): mounted filesystem with ordered data mode. Opts: acl
EDAC amd64: Node 0: DRAM ECC disabled.
EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
EXT4-fs (sdd10): mounted filesystem with ordered data mode. Opts: acl
EDAC amd64: Node 0: DRAM ECC disabled.
EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
EXT4-fs (sdd5): mounted filesystem with ordered data mode. Opts: acl
FAT-fs (sdd1): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
usb 1-2.1: new low-speed USB device number 3 using xhci_hcd
FAT-fs (sdd1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[drm] amdgpu kernel modesetting enabled.
AMD IOMMUv2 driver by Joerg Roedel
Parsing CRAT table with 1 nodes
Creating topology SYSFS entries
Topology: Add APU node [0x0:0x0]
Finished initializing topology
kfd kfd: Initialized module
checking generic (e0000000 300000) vs hw (e0000000 10000000)
fb: switching to amdgpudrmfb from EFI VGA
Console: switching to colour dummy device 80x25
[drm] initializing kernel modesetting (RAVEN 0x1002:0x15DD 0x1458:0xD000 0xC6).
[drm] register mmio base: 0xFE600000
[drm] register mmio size: 524288
[drm] probing gen 2 caps for device 1022:15db = 700d03/e
[drm] probing mlw for device 1022:15db = 700d03
[drm] add ip block number 0
[drm] add ip block number 1
[drm] add ip block number 2
[drm] add ip block number 3
[drm] add ip block number 4
[drm] add ip block number 5
[drm] add ip block number 6
[drm] add ip block number 7
[drm] add ip block number 8
kfd kfd: DID 15dd is missing in supported_devices
kfd kfd: kgd2kfd_probe failed
[drm] VCN decode is enabled in VM mode
[drm] VCN encode is enabled in VM mode
EXT4-fs (sdc1): mounted filesystem with ordered data mode. Opts: (null)
[drm] BIOS signature incorrect 0 0
ATOM BIOS: 113-RAVEN-106
[drm] vm size is 262144 GB, 4 levels, block size is 9-bit, fragment size is 9-bit
amdgpu 0000:08:00.0: VRAM: 2048M 0x000000F400000000 - 0x000000F47FFFFFFF (2048M used)
amdgpu 0000:08:00.0: GTT: 1024M 0x000000F500000000 - 0x000000F53FFFFFFF
[drm] Detected VRAM RAM=2048M, BAR=2048M
[drm] RAM width 128bits DDR4
[TTM] Zone kernel: Available graphics memory: 7186052 kiB
[TTM] Zone dma32: Available graphics memory: 2097152 kiB
[TTM] Initializing pool allocator
[TTM] Initializing DMA pool allocator
[drm] amdgpu: 2048M of VRAM memory ready
[drm] amdgpu: 3072M of GTT memory ready.
[drm] GART: num cpu pages 262144, num gpu pages 262144
[drm] PCIE GART of 1024M enabled (table at 0x000000F400900000).
[drm] use_doorbell being set to: [true]
[drm] Found VCN firmware Version: 1.73 Family ID: 18
EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null)
amdgpu: [powerplay] dpm has been enabled
[drm:construct [amdgpu]] *ERROR* construct: Invalid Connector ObjectID from Adapter Service for connector index:2! type 0 expected 3
[drm:construct [amdgpu]] *ERROR* construct: Invalid Connector ObjectID from Adapter Service for connector index:3! type 0 expected 3
[drm] Display Core initialized with v3.1.44!
[drm] SADs count is: -2, don't need to read it
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
usb 1-2.1: New USB device found, idVendor=046d, idProduct=c012, bcdDevice=13.20
usb 1-2.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-2.1: Product: USB-PS/2 Optical Mouse
usb 1-2.1: Manufacturer: Logitech
[drm] VCN decode and encode initialized successfully.
[drm] fb mappable at 0x61100000
[drm] vram apper at 0x60000000
[drm] size 9216000
[drm] fb depth is 24
[drm] pitch is 7680
fbcon: amdgpudrmfb (fb0) is primary device
EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
Console: switching to colour frame buffer device 240x75
amdgpu 0000:08:00.0: fb0: amdgpudrmfb frame buffer device
amdgpu 0000:08:00.0: ring 0(gfx) uses VM inv eng 4 on hub 0
amdgpu 0000:08:00.0: ring 1(comp_1.0.0) uses VM inv eng 5 on hub 0
amdgpu 0000:08:00.0: ring 2(comp_1.1.0) uses VM inv eng 6 on hub 0
amdgpu 0000:08:00.0: ring 3(comp_1.2.0) uses VM inv eng 7 on hub 0
amdgpu 0000:08:00.0: ring 4(comp_1.3.0) uses VM inv eng 8 on hub 0
amdgpu 0000:08:00.0: ring 5(comp_1.0.1) uses VM inv eng 9 on hub 0
amdgpu 0000:08:00.0: ring 6(comp_1.1.1) uses VM inv eng 10 on hub 0
amdgpu 0000:08:00.0: ring 7(comp_1.2.1) uses VM inv eng 11 on hub 0
amdgpu 0000:08:00.0: ring 8(comp_1.3.1) uses VM inv eng 12 on hub 0
amdgpu 0000:08:00.0: ring 9(kiq_2.1.0) uses VM inv eng 13 on hub 0
amdgpu 0000:08:00.0: ring 10(sdma0) uses VM inv eng 4 on hub 1
amdgpu 0000:08:00.0: ring 11(vcn_dec) uses VM inv eng 5 on hub 1
amdgpu 0000:08:00.0: ring 12(vcn_enc0) uses VM inv eng 6 on hub 1
amdgpu 0000:08:00.0: ring 13(vcn_enc1) uses VM inv eng 7 on hub 1
usb 1-2.2: new low-speed USB device number 4 using xhci_hcd
[drm] Initialized amdgpu 3.26.0 20150101 for 0000:08:00.0 on minor 0
usb 1-2.2: New USB device found, idVendor=06a3, idProduct=8020, bcdDevice= 1.30
usb 1-2.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-2.2: Product: Saitek Eclipse Keyboard
usb 1-2.2: Manufacturer: Chicony
usb 1-2.3: new low-speed USB device number 5 using xhci_hcd
usb 1-2.3: New USB device found, idVendor=10d5, idProduct=000d, bcdDevice= 3.00
usb 1-2.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-2.3: Product: HA2-A3
usb 1-2.3: Manufacturer: No brand
usb 1-2.3: SerialNumber: 02\xffffffc2\xffffff92
hidraw: raw HID events driver (C) Jiri Kosina
usbhid 1-2.3:1.1: couldn't find an input interrupt endpoint
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:01.2/0000:01:00.0/usb1/1-2/1-2.1/1-2.1:1.0/0003:046D:C012.0001/input/input13
hid-generic 0003:046D:C012.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:01:00.0-2.1/input0
input: Chicony Saitek Eclipse Keyboard as /devices/pci0000:00/0000:00:01.2/0000:01:00.0/usb1/1-2/1-2.2/1-2.2:1.0/0003:06A3:8020.0002/input/input14
hid-generic 0003:06A3:8020.0002: input,hidraw1: USB HID v1.11 Keyboard [Chicony Saitek Eclipse Keyboard] on usb-0000:01:00.0-2.2/input0
input: Chicony Saitek Eclipse Keyboard Consumer Control as /devices/pci0000:00/0000:00:01.2/0000:01:00.0/usb1/1-2/1-2.2/1-2.2:1.1/0003:06A3:8020.0003/input/input15
input: Chicony Saitek Eclipse Keyboard System Control as /devices/pci0000:00/0000:00:01.2/0000:01:00.0/usb1/1-2/1-2.2/1-2.2:1.1/0003:06A3:8020.0003/input/input16
hid-generic 0003:06A3:8020.0003: input,hiddev0,hidraw2: USB HID v1.11 Device [Chicony Saitek Eclipse Keyboard] on usb-0000:01:00.0-2.2/input1
input: No brand HA2-A3 as /devices/pci0000:00/0000:00:01.2/0000:01:00.0/usb1/1-2/1-2.3/1-2.3:1.0/0003:10D5:000D.0004/input/input17
hid-generic 0003:10D5:000D.0004: input,hidraw3: USB HID v1.10 Keyboard [No brand HA2-A3] on usb-0000:01:00.0-2.3/input0
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.39.0-ioctl (2018-04-03) initialised: dm-devel@redhat.com
CAPI 2.0 started up with major 68 (middleware)
r8169 0000:04:00.0: Direct firmware load for rtl_nic/rtl8168g-2.fw failed with error -2
r8169 0000:04:00.0 enp4s0: unable to load firmware patch rtl_nic/rtl8168g-2.fw (-2)
r8169 0000:04:00.0 enp4s0: link down
r8169 0000:04:00.0 enp4s0: link down
IPv6: ADDRCONF(NETDEV_UP): enp4s0: link is not ready
r8169 0000:04:00.0 enp4s0: link up
IPv6: ADDRCONF(NETDEV_CHANGE): enp4s0: link becomes ready
NET: Registered protocol family 17
xt_CT: No such helper "pptp"
xt_CT: No such helper "snmp"
xt_CT: No such helper "netbios-ns"
xt_CT: No such helper "irc"
xt_CT: No such helper "irc-0"
bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
xt_addrtype: ipv6 does not support BROADCAST matching
EXT4-fs (sdd8): re-mounted. Opts: acl,commit=0
EXT4-fs (sdd9): re-mounted. Opts: acl,commit=0
EXT4-fs (sdd7): re-mounted. Opts: acl,commit=0
EXT4-fs (sdd10): re-mounted. Opts: acl,commit=0
EXT4-fs (sdd5): re-mounted. Opts: acl,commit=0
EXT4-fs (sdc1): re-mounted. Opts: commit=0
EXT4-fs (sdb1): re-mounted. Opts: commit=0
EXT4-fs (sda1): re-mounted. Opts: commit=0
PM: suspend entry (deep)
PM: Syncing filesystems ... done.
Freezing user space processes ... (elapsed 0.001 seconds) done.
OOM killer disabled.
Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
Suspending console(s) (use no_console_suspend to debug)
sd 9:0:0:0: [sdd] Synchronizing SCSI cache
sd 9:0:0:0: [sdd] Stopping disk
sd 4:0:0:0: [sdc] Synchronizing SCSI cache
sd 0:0:0:0: [sda] Synchronizing SCSI cache
sd 0:0:0:0: [sda] Stopping disk
sd 4:0:0:0: [sdc] Stopping disk
sd 1:0:0:0: [sdb] Synchronizing SCSI cache
sd 1:0:0:0: [sdb] Stopping disk
ACPI: Preparing to enter system sleep state S3
PM: Saving platform NVS memory
Disabling non-boot CPUs ...
IRQ 27: no longer affine to CPU1
IRQ 43: no longer affine to CPU1
IRQ 48: no longer affine to CPU1
IRQ 49: no longer affine to CPU1
IRQ 60: no longer affine to CPU1
IRQ 61: no longer affine to CPU1
IRQ 66: no longer affine to CPU1
smpboot: CPU 1 is now offline
smpboot: CPU 2 is now offline
IRQ 46: no longer affine to CPU3
IRQ 47: no longer affine to CPU3
IRQ 58: no longer affine to CPU3
smpboot: CPU 3 is now offline
smpboot: CPU 4 is now offline
smpboot: CPU 5 is now offline
smpboot: CPU 6 is now offline
smpboot: CPU 7 is now offline
ACPI: Low-level resume complete
PM: Restoring platform NVS memory
Enabling non-boot CPUs ...
x86: Booting SMP configuration:
smpboot: Booting Node 0 Processor 1 APIC 0x1
cache: parent cpu1 should not be sleeping
microcode: CPU1: patch_level=0x0810100b
CPU1 is up
smpboot: Booting Node 0 Processor 2 APIC 0x2
cache: parent cpu2 should not be sleeping
microcode: CPU2: patch_level=0x0810100b
CPU2 is up
smpboot: Booting Node 0 Processor 3 APIC 0x3
cache: parent cpu3 should not be sleeping
microcode: CPU3: patch_level=0x0810100b
CPU3 is up
smpboot: Booting Node 0 Processor 4 APIC 0x4
cache: parent cpu4 should not be sleeping
microcode: CPU4: patch_level=0x0810100b
CPU4 is up
smpboot: Booting Node 0 Processor 5 APIC 0x5
cache: parent cpu5 should not be sleeping
microcode: CPU5: patch_level=0x0810100b
CPU5 is up
smpboot: Booting Node 0 Processor 6 APIC 0x6
cache: parent cpu6 should not be sleeping
microcode: CPU6: patch_level=0x0810100b
CPU6 is up
smpboot: Booting Node 0 Processor 7 APIC 0x7
cache: parent cpu7 should not be sleeping
microcode: CPU7: patch_level=0x0810100b
CPU7 is up
ACPI: Waking up from system sleep state S3
usb usb1: root hub lost power or was reset
usb usb2: root hub lost power or was reset
[drm] PCIE GART of 1024M enabled (table at 0x000000F400900000).
[drm] PSP is resuming...
sd 0:0:0:0: [sda] Starting disk
sd 1:0:0:0: [sdb] Starting disk
sd 4:0:0:0: [sdc] Starting disk
sd 9:0:0:0: [sdd] Starting disk
ata3: SATA link down (SStatus 0 SControl 300)
ata4: SATA link down (SStatus 0 SControl 300)
ata9: SATA link down (SStatus 0 SControl 300)
ata7: SATA link down (SStatus 0 SControl 300)
ata8: SATA link down (SStatus 0 SControl 300)
usb 1-2: reset high-speed USB device number 2 using xhci_hcd
ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata10: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata6.00: configured for UDMA/133
ata10.00: configured for UDMA/133
amdgpu: [powerplay] dpm has been enabled
[drm] SADs count is: -2, don't need to read it
[drm] VCN decode and encode initialized successfully.
amdgpu 0000:08:00.0: ring 0(gfx) uses VM inv eng 4 on hub 0
amdgpu 0000:08:00.0: ring 1(comp_1.0.0) uses VM inv eng 5 on hub 0
amdgpu 0000:08:00.0: ring 2(comp_1.1.0) uses VM inv eng 6 on hub 0
amdgpu 0000:08:00.0: ring 3(comp_1.2.0) uses VM inv eng 7 on hub 0
amdgpu 0000:08:00.0: ring 4(comp_1.3.0) uses VM inv eng 8 on hub 0
amdgpu 0000:08:00.0: ring 5(comp_1.0.1) uses VM inv eng 9 on hub 0
amdgpu 0000:08:00.0: ring 6(comp_1.1.1) uses VM inv eng 10 on hub 0
amdgpu 0000:08:00.0: ring 7(comp_1.2.1) uses VM inv eng 11 on hub 0
amdgpu 0000:08:00.0: ring 8(comp_1.3.1) uses VM inv eng 12 on hub 0
amdgpu 0000:08:00.0: ring 9(kiq_2.1.0) uses VM inv eng 13 on hub 0
amdgpu 0000:08:00.0: ring 10(sdma0) uses VM inv eng 4 on hub 1
amdgpu 0000:08:00.0: ring 11(vcn_dec) uses VM inv eng 5 on hub 1
amdgpu 0000:08:00.0: ring 12(vcn_enc0) uses VM inv eng 6 on hub 1
amdgpu 0000:08:00.0: ring 13(vcn_enc1) uses VM inv eng 7 on hub 1
usb 1-2.2: reset low-speed USB device number 4 using xhci_hcd
usb 1-2.1: reset low-speed USB device number 3 using xhci_hcd
usb 1-2.3: reset low-speed USB device number 5 using xhci_hcd
ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata1.00: configured for UDMA/133
ata5: softreset failed (device not ready)
ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata2.00: configured for UDMA/133
ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata5.00: configured for UDMA/133
acpi LNXPOWER:01: Turning OFF
OOM killer enabled.
Restarting tasks ... done.
PM: suspend exit
r8169 0000:04:00.0 enp4s0: link down
r8169 0000:04:00.0 enp4s0: link down
IPv6: ADDRCONF(NETDEV_UP): enp4s0: link is not ready
EXT4-fs (sdd8): re-mounted. Opts: acl,commit=0
EXT4-fs (sdd9): re-mounted. Opts: acl,commit=0
EXT4-fs (sdd7): re-mounted. Opts: acl,commit=0
EXT4-fs (sdd10): re-mounted. Opts: acl,commit=0
EXT4-fs (sdd5): re-mounted. Opts: acl,commit=0
EXT4-fs (sdc1): re-mounted. Opts: commit=0
EXT4-fs (sdb1): re-mounted. Opts: commit=0
EXT4-fs (sda1): re-mounted. Opts: commit=0
r8169 0000:04:00.0 enp4s0: link up
IPv6: ADDRCONF(NETDEV_CHANGE): enp4s0: link becomes ready
EXT4-fs (sdd8): re-mounted. Opts: acl,commit=0
EXT4-fs (sdd9): re-mounted. Opts: acl,commit=0
EXT4-fs (sdd7): re-mounted. Opts: acl,commit=0
EXT4-fs (sdd10): re-mounted. Opts: acl,commit=0
EXT4-fs (sdd5): re-mounted. Opts: acl,commit=0
EXT4-fs (sdc1): re-mounted. Opts: commit=0
EXT4-fs (sdb1): re-mounted. Opts: commit=0
EXT4-fs (sda1): re-mounted. Opts: commit=0
PM: suspend entry (deep)
PM: Syncing filesystems ... done.
Freezing user space processes ... (elapsed 0.001 seconds) done.
OOM killer disabled.
Freezing remaining freezable tasks ... (elapsed 0.000 seconds) done.
Suspending console(s) (use no_console_suspend to debug)
sd 1:0:0:0: [sdb] Synchronizing SCSI cache
sd 9:0:0:0: [sdd] Synchronizing SCSI cache
sd 0:0:0:0: [sda] Synchronizing SCSI cache
sd 1:0:0:0: [sdb] Stopping disk
sd 0:0:0:0: [sda] Stopping disk
sd 9:0:0:0: [sdd] Stopping disk
sd 4:0:0:0: [sdc] Synchronizing SCSI cache
sd 4:0:0:0: [sdc] Stopping disk
ACPI: Preparing to enter system sleep state S3
PM: Saving platform NVS memory
Disabling non-boot CPUs ...
irq_migrate_all_off_this_cpu: 18 callbacks suppressed
IRQ 27: no longer affine to CPU1
IRQ 48: no longer affine to CPU1
IRQ 49: no longer affine to CPU1
IRQ 60: no longer affine to CPU1
IRQ 61: no longer affine to CPU1
IRQ 66: no longer affine to CPU1
smpboot: CPU 1 is now offline
smpboot: CPU 2 is now offline
IRQ 46: no longer affine to CPU3
IRQ 47: no longer affine to CPU3
IRQ 58: no longer affine to CPU3
IRQ 59: no longer affine to CPU3
smpboot: CPU 3 is now offline
smpboot: CPU 4 is now offline
smpboot: CPU 5 is now offline
smpboot: CPU 6 is now offline
smpboot: CPU 7 is now offline
ACPI: Low-level resume complete
PM: Restoring platform NVS memory
Enabling non-boot CPUs ...
x86: Booting SMP configuration:
smpboot: Booting Node 0 Processor 1 APIC 0x1
cache: parent cpu1 should not be sleeping
microcode: CPU1: patch_level=0x0810100b
CPU1 is up
smpboot: Booting Node 0 Processor 2 APIC 0x2
cache: parent cpu2 should not be sleeping
microcode: CPU2: patch_level=0x0810100b
CPU2 is up
smpboot: Booting Node 0 Processor 3 APIC 0x3
cache: parent cpu3 should not be sleeping
microcode: CPU3: patch_level=0x0810100b
CPU3 is up
smpboot: Booting Node 0 Processor 4 APIC 0x4
cache: parent cpu4 should not be sleeping
microcode: CPU4: patch_level=0x0810100b
CPU4 is up
smpboot: Booting Node 0 Processor 5 APIC 0x5
cache: parent cpu5 should not be sleeping
microcode: CPU5: patch_level=0x0810100b
CPU5 is up
smpboot: Booting Node 0 Processor 6 APIC 0x6
cache: parent cpu6 should not be sleeping
microcode: CPU6: patch_level=0x0810100b
CPU6 is up
smpboot: Booting Node 0 Processor 7 APIC 0x7
cache: parent cpu7 should not be sleeping
microcode: CPU7: patch_level=0x0810100b
CPU7 is up
ACPI: Waking up from system sleep state S3
usb usb1: root hub lost power or was reset
usb usb2: root hub lost power or was reset
[drm] PCIE GART of 1024M enabled (table at 0x000000F400900000).
[drm] PSP is resuming...
sd 0:0:0:0: [sda] Starting disk
sd 1:0:0:0: [sdb] Starting disk
sd 4:0:0:0: [sdc] Starting disk
sd 9:0:0:0: [sdd] Starting disk
ata7: SATA link down (SStatus 0 SControl 300)
ata9: SATA link down (SStatus 0 SControl 300)
ata3: SATA link down (SStatus 0 SControl 300)
ata8: SATA link down (SStatus 0 SControl 300)
ata4: SATA link down (SStatus 0 SControl 300)
usb 1-2: reset high-speed USB device number 2 using xhci_hcd
ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata10: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata6.00: configured for UDMA/133
ata10.00: configured for UDMA/133
amdgpu: [powerplay] dpm has been enabled
[drm] SADs count is: -2, don't need to read it
[drm] VCN decode and encode initialized successfully.
amdgpu 0000:08:00.0: ring 0(gfx) uses VM inv eng 4 on hub 0
amdgpu 0000:08:00.0: ring 1(comp_1.0.0) uses VM inv eng 5 on hub 0
amdgpu 0000:08:00.0: ring 2(comp_1.1.0) uses VM inv eng 6 on hub 0
amdgpu 0000:08:00.0: ring 3(comp_1.2.0) uses VM inv eng 7 on hub 0
amdgpu 0000:08:00.0: ring 4(comp_1.3.0) uses VM inv eng 8 on hub 0
amdgpu 0000:08:00.0: ring 5(comp_1.0.1) uses VM inv eng 9 on hub 0
amdgpu 0000:08:00.0: ring 6(comp_1.1.1) uses VM inv eng 10 on hub 0
amdgpu 0000:08:00.0: ring 7(comp_1.2.1) uses VM inv eng 11 on hub 0
amdgpu 0000:08:00.0: ring 8(comp_1.3.1) uses VM inv eng 12 on hub 0
amdgpu 0000:08:00.0: ring 9(kiq_2.1.0) uses VM inv eng 13 on hub 0
amdgpu 0000:08:00.0: ring 10(sdma0) uses VM inv eng 4 on hub 1
amdgpu 0000:08:00.0: ring 11(vcn_dec) uses VM inv eng 5 on hub 1
amdgpu 0000:08:00.0: ring 12(vcn_enc0) uses VM inv eng 6 on hub 1
amdgpu 0000:08:00.0: ring 13(vcn_enc1) uses VM inv eng 7 on hub 1
usb 1-2.2: reset low-speed USB device number 4 using xhci_hcd
usb 1-2.1: reset low-speed USB device number 3 using xhci_hcd
usb 1-2.3: reset low-speed USB device number 5 using xhci_hcd
ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata1.00: configured for UDMA/133
ata5: softreset failed (device not ready)
ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata2.00: configured for UDMA/133
ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata5.00: configured for UDMA/133
OOM killer enabled.
Restarting tasks ... done.
PM: suspend exit
r8169 0000:04:00.0 enp4s0: link down
r8169 0000:04:00.0 enp4s0: link down
IPv6: ADDRCONF(NETDEV_UP): enp4s0: link is not ready
EXT4-fs (sdd8): re-mounted. Opts: acl,commit=0
EXT4-fs (sdd9): re-mounted. Opts: acl,commit=0
EXT4-fs (sdd7): re-mounted. Opts: acl,commit=0
EXT4-fs (sdd10): re-mounted. Opts: acl,commit=0
EXT4-fs (sdd5): re-mounted. Opts: acl,commit=0
EXT4-fs (sdc1): re-mounted. Opts: commit=0
EXT4-fs (sdb1): re-mounted. Opts: commit=0
EXT4-fs (sda1): re-mounted. Opts: commit=0
r8169 0000:04:00.0 enp4s0: link up
IPv6: ADDRCONF(NETDEV_CHANGE): enp4s0: link becomes ready